3.0" high, 9.6" wide. Distance from Lock and Level™ Assembly to top of fixture is 2.6 ".
Body is 6063-T6 extruded aluminum with steel joiner system, and plug-together wiring standard. End brackets are constructed of 18-gauge steel. All components are hard-tooled to tolerances of 0.010".
(FE) Flat endcap standard, 14 gauge dieformed steel, adds 0.1" at each end.
(96W) Die-formed, 96% reflective white. Optional: (EP) Extended Performance reflector system.
UPLIGHT OPTICAL OPTIONS
Open No optical control.
CCO Controlled Center Optics, covers center lamp, 100% downlight (center only).
STO Soft Top Optic, perforations cover the lamps.
TDO Totally Direct Optic, solid top above lamps.
DOWNLIGHT SHIELDING OPTIONS
WCB White Cross Blade baffle, white cross blades with straight edges spaced approximately 1" apart.
PLV Parabolic Louver, semi-specular louvers with straight edges, spaced approximately 1" apart.
PS Perf Shield, concave shield with round perforations.
Optional Dust Cover, clear acrylic, T8 lamps only. NOTE: Will significantly impact light level performance. Contact Factory.
120 or 277V prewired. Fixture and electrical Components UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V ballast, prewired dual circuit, emergency circuits, emergency battery packs. Contact factory.
Series X1-E can be specified with integrated closed loop daylight 0-10v dimming or switching sensors, and occupancy sensors. Standard sensors by Wattstopper include: FD-301 daylight dimming photosensor, LS-102 daylight switching photosensor, and the FS-205 PIR occupancy sensor. sensors by Lutron are also available.