Series X1-E Specifications

DIMENSIONS

3.0" high, 12.0" wide. Distance from Lock and Level™ Assembly to top of fixture is 2.6 ".

CONSTRUCTION

Body is 6063-T6 extruded aluminum with steel joiner system, and plug-together wiring standard. End brackets are constructed of 18-gauge steel. All Components are hard-tooled to tolerances of 0.010".

ENDCAPS

(FE) Flat endcap standard, 14 gauge dieformed steel, adds 0.1" at each end. Optional Extended endcap (EE) adds 3.75" to each end.

REFLECTORS

(96W) Die-formed, 96% reflective white. Optional: (EP) Extended Performance reflector system.

UPLIGHT OPTICAL OPTIONS

Open No optical control.

CCO Controlled Center Optics, covers center lamp, 100% downlight (center only).

STO Soft Top Optic, perforations cover the lamps.

TDO Totally Direct Optic, solid top above lamps.

DOWNLIGHT SHIELDING OPTIONS

WCB White Cross Blade baffle, white cross blades spaced approximately 1" apart.

PLV Parabolic Louver, semi-specular louvers with straight edges, spaced approximately 1" apart.

PS Perf Shield, concave shield with round perforations.

ACCESSORY

Optional Dust Cover, clear acrylic, T8 lamps only. NOTE: Will significantly impact light level performance. Contact Factory.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components UL/C-UL listed and will bear UL/C-Ul labels. Optional Adders: 347V dual circuit, emergency circuits, emergency battery packs. Contact factory.

INTEGRATED SENSORS

Series X1-E can be specified with integrated sensors from Wattstopper, Philips, and Lutron. Daylight Sensors: Wattstopper sensors can be supplied with either a closed loop 0-10v dimming (handheld remote supplied) or closed loop single zone switching system. The Lutron sensor is directional and for use with Ecosystem ballasts. The Philips sensor is a closed loop 0-10v sensor for use with Advance Mark 7 ballasts. Occupancy Sensor: Wattstopper occupancy sensor is a pIR sensor with additional hold-off daylight feature.

LAMPING

Available in 1, 2 or 3 T8, T5 or T5HO lamp cross sections. Lamp diffuser included with T5HO lamps.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5HO lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others). Contact factory for multiple ballast factors in one luminaire.

MOUNTING OPTIONS

(FA) 50" fully Adjustable aircraft cable standard with safety stop. Contact factory for additional lengths up to 150". Mounting connects to fixture with factory-installed Level and Lock™ Assembly, which allows side-to-side fixture leveling and locks it into place. NOTE: Curved balancer assembly is 2.6" above top of fixture. Optional: (AC) Semi-adjustable aircraft cable (± 0.5") in lengths of 12", 15", 18", 21", 24", 27", 30", 36". Optional: (FM) Flexible Mounting Bracket, adjusts along The length of the fixture to accommodate existing feeds. Optional: (SM) Surface Mount mounts directly to ceiling surface. TDO required for SM.

SUPPORT CABLES

Plated steel cable and hardware.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 5 amps. Optional Adders: Coil Cord Feed requires flexible mounting bracket.

FINISHES

Finelite Signal White standard. Optional Adders: 185 colors available from Tiger Drylac's RAL Color chart.

LENGTHS

4', 8', and 12' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 2.0 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.