Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
Overview Options Specifications Images

Photometry

HP-WG Wall Grazer Photometry

HP-WG Wall Grazer
6"W x 2"D
3500K, Very High Output (V)
Total lumens: 2578
Lumens per foot: 645
Lumens per watt: 70

Refer to the tech sheet to calculate lumens for the desired CCT or CRI.

HP-WG Wall Grazer Specifications

CONSTRUCTION

Precision cut 6061-T6 extruded aluminum visible flange and reflector carrier. Internal joiner system, plug-together wiring standard. Steel sheet metal galvanized and powder coated body.

ENDCAPS

The luminaire can terminate in two different end conditions to accommodate project needs. Endcaps are made of 20-guage die-formed powdercoated steel.

END CONDITIONS:

FLAT (standard) (FE-L or FE-R): Is used when the luminaire terminates at a wall. Adds 1/8" per endcap to overall length of the luminaire.

POCKET SLOT (PE-L or PE-R): Includes the necessary hardware to accommodate ceiling materials when the luminaire doesn’t terminate at a wall. Adds 1-1/4" for Spackle Flange and 1" for T-Bar per endcap to overall length of the luminaire.

REFLECTORS

97% reflective semi-specular aluminum reflector provides reflectivity and glare control.

DIFFUSER

Frosted lenses are 0.040". All lenses are UV-stabilized and impact resistant virgin acrylic.

LIGHT OUTPUT

Four lumen packages available; Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V/347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD): <20%. Step-dimming driver (limited programable outputs. Contact Factory). Expected driver lifetime: 100,000 hours.

LUTRON DRIVER OPTIONS

Lut3W-3-wire, LutESEcoSystem, Lut2W-2-wire.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, backup battery. Factory-choice low-profile backup battery available. 8 ft. minimum fixture length for low profile battery pack. Backup batteries deliver 1289 lumens. Half of a 4 ft. section will be illuminated in emergency mode. Optional fusing is available. Chicago Plenum Option available.

 
CIRCUITING

4 ft. sections can be specified with up to 2 circuits. 8 ft. sections can be specified with up to 4 circuits. All others are available with a single circuit.

MOUNTING

The standard mounting (Threaded Rod - TR) option eliminates the need to install luminaires prior to the slot being framed. Luminaire mounts on threaded rods. Optional Mounting Bracket installation includes wall bracket that is attached to the wall. Luminaires are then snapped onto bracket. Luminaire installation that uses the mounting bracket must be performed before the perimeter slot framing is built.

FINISH

Finelite Signal White powder coat finish standard. Optional adder: 185 colors available using RAL color chart. Custom color applies to the visible T-Bar flange.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps. Optional 6 ft. flex conduit whips available. Dual knockouts (for dual flex conduit) are available at the top and rear feed locations. Endcaps have a single knockout and support a single flex conduit only.

LENGTHS

Any length, 2-foot minimum, in increments down to 1/16" (± 1/32"). 8-foot maximum section length.

LABELS

Fixture and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. IC-Rated. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

Threaded Rod luminaire 4.5 lb/ft., Wall Bracket luminaire 5 lb/ft.

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map