Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
Flat diecast aluminum endcaps add 0.25" to each end of luminaire.
Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint.
12' maximum lens length. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Frost white snap-in lens, 73% transmissive, 99% diffusion.
Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.
90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD) < 20%. Expected driver lifetime: 100,000 hours.
LUTRON DRIVER OPTIONS
LutES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LutES5 (5-Series 5% EcoSystem (LDE5 Series)), Lut2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.
Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factorychoice low-profile backup battery available. 8' minimum fixture length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum fixture length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode.
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S