Direct Specifications

CONSTRUCTION

Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.

ENDCAPS

Flat diecast aluminum endcaps add 0.25" to each end of luminaire.

MITERED CORNER

Fully illuminated 90° corners have internal secondary diffusers to ensure against light leaks. Custom angles are available (90° minimum on inside corners.) Contact factory.

REFLECTORS

Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint.

DOWNLIGHT DIFFUSER

12' maximum diffuser length. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Frost white snap-in lens, 73% transmissive, 99% diffusion.

LIGHT OUTPUT

Lumen packages available for HP-6 D: Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). Lumen packages available for HP-6 EO D: High Output (H), Very High Output (V), and Extremely High Output (X). A separate chart summarizes lumen distribution and wattage.

LIGHT ENGINE

The replaceable light engines are made up of high performance mid-power LEDs and designed to distribute heat properly to maximize the life of the LEDs and the driver.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours.

LUTRON DRIVER OPTIONS

Lut3W-3-wire, LutESEcoSystem, Lut2W-2-wire.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factorychoice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode.

Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

INTEGRATED SENSORS

Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.

MOUNTING

50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths.

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps.

LENGTHS

Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32”). 12-foot maximum section length.

LABELS

Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

HP-6 D: 3.6 lb/ft
HP-6 EO D: 3.75 lb/ft

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

Refer to the tunable white tech sheet for more information.