Dimensions & Light Engine
Asymmetric distribution is attained with midpowered LEDs distributed evenly and paired with a precise diffuser.
The standard kicker reflector delivers light high on the vertical surface and provides excellent glare control. The kicker reflector is easily removed for open distribution.
Mid-powered LEDs allow heat to be fully dissipated without the need for additional heat sinks.
Setback Info and Application Data
High Output with Kicker
Total luminaire output: 1450 Lumens (363 lumens/foot)
19.1 Watts (4.8 watts/foot)
Fixture length: 8'
To bottom of the fixture: 9'-0"
Room reflectances: 80-50-20
Maintained illuminance levels – LLF 0.90"
Downlight dims to 10%. 0-10v dimming standard.
Standard Fixture Lengths
Standard 4’, 8’, and 12’ section lengths can be combined to make longer runs. Contact factory for lengths in increments of 1’ or down to the inch.
Plug-Together Wiring is Standard
Plug together wiring between fixture sections is standard.
Sheet Rock Installation
Flex conduit is secured to top of fixture. Support to structure using All-Thread. All-Thread support holes are located on each end of the fixture.
HP-4 WW-R for T-Bar installations comes standard with a splice plate at the end of the luminaire. Mounting brackets (supplied) secure the fixture to T-Bar and provide support to structure location. All starter/independent fixtures are 1 1/8" shorter than nominal. All joiner/ender fixture are normal length.