Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
Overview Options Specifications Images


HP-4 WW-D Photometry

3500K, Very High Output (V)
Total lumens: 1816
Lumens per foot: 454
Lumens per watt: 91.7

Refer to the tech sheet to calculate lumens for the desired CCT or CRI.

Wall Wash Direct Specifications


Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.


Flat diecast aluminum endcaps add 0.25" to each end of luminaire.


The standard semi-specular aluminum (SSA) kicker (K) reflector delivers light high on the vertical surface. The kicker reflector can be easily removed for open distribution (FO).


Luminaires are standard with frosted lenses. All lenses are UV-stabilized and impact resistant virgin acrylic. Frosted lenses are 0.080" thick. 12' maximum lens length.


Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.


90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.


Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD) < 20%. Expected driver lifetime: 100,000 hours. controls with a range of 100-10%.


LutES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LutES5 (5-Series 5% EcoSystem (LDE5 Series)), Lut2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.


Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory choice low-profile backup battery available. 8' minimum fixture length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum fixture length. Backup battery delivers 1400 lumens. One 4' section will be illuminated in emergency mode.

Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732


50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' fixture lengths and up to 1' in on shorter lengths.


Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps.


Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length.


Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2011/65/EU.


2.9 lb/ft.


10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.


Refer to the tunable white tech sheet for more information.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Sales Terms and Conditions  |  Site Map