Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
ID
ID
D
D
WW-D
WW-D
I
I
WM-ID
WM-ID
WM-D
WM-D
WM-I
WM-I
RECESSED
RECESSED
WW-RECESSED
WW-RECESSED
SM
SM
WW-SM
WW-SM
WW-AM
WW-AM
Overview Options Specifications Images

Photometry

HP-4 WM-ID ASY Photometry

HP-4 WM-ID ASY
3500K, Very High Output (V)

Total lumens: 8202
lumens/foot: 2051
lumens/watt: 111

 

HP-4 WM-ID Photometry

HP-4 WM-ID
3500K, Very High Output (V)

Total lumens: 7886
lumens/foot: 1972
lumens/watt: 106

 

Refer to the tech sheet to calculate lumens for the desired CCT or CRI.

Wall Mount-Indirect/Direct Specifications

CONSTRUCTION

Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.

ENDCAPS

Flat diecast aluminum endcaps add 0.25" to each end of luminaire.

MITERED CORNERS

Illuminated 90° corners in a single plane, with Top Glow™ or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90° minimum on inside corners), contact factory.

REFLECTORS

Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint.

UPLIGHT OPTION

Patented Top Glow frost white diffuser standard. 12 ft. maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Asymmetric optic directs light in a specific direction. ASY-R distributed light to the right of the luminaire. See page 2.

DOWNLIGHT DIFFUSER

12' maximum lens length. Flush frost white snap-in lens standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow™ frost white snapin lens option, 73% transmissive, 99% diffusion.

LIGHT OUTPUT

Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Separate dimming for uplight and downlight available. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factorychoice low-profile backup battery available. 8' minimum fixture length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum fixture length. Backup batteries deliver 1300 lumens. Half of a 4' section (downlight only) will be illuminated in emergency mode.

 
LUTRON DRIVER OPTIONS

Lut3W-3-wire, LutESEcoSystem, Lut2W-2-wire.

INTEGRATED SENSORS

Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.

MOUNTING

Fixture hangs securely from mounting brackets fastened directly to the wall for easy installation. Fixture stands 0.5" off the wall. The mounting bracket is concealed behind the fixture.

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac’s non-metallic RAL colors.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14- gauge feed used when fixture current exceeds 5 amps. Optional 6' flex conduit whips available.

LENGTHS

Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32”). 12-foot maximum section length.

LABELS

Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

3.4 lb/ft.

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map