Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
Overview Options Specifications Images


HP-4 D Photometry

3500K, Very High Output (V)
Total lumens: 3705
Lumens per foot: 926
Lumens per watt: 100.1

Refer to the tech sheet to calculate lumens for the desired CCT or CRI.

Wall Mount-Direct Specifications


Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.


Flat diecast aluminum endcaps add 1/4" to each end of luminaire. Drop Down Lens Illuminated Endcap (DE) includes diffuse element to continue luminance of drop lens. It is made of the same material as the drop diffuser. Open Endcap (OE) is for use with the Hollowed Ellipse Louver (LHE); following the curve of the louver.


Illuminated 90° corners in a single plane, available with Top Glow™, Flush uplight diffuser, and/or Flush downlight diffuser, Bottom Glow Diffuser, 1” Drop Down Lens, Regressed Diffuser, or White Cross Blade Baffle. Contact factory for custom angles. 90 degree corners not available with Hollowed Ellipse Louver (LHE) or Hex Louver (LHC). White Cross Blade Baffle (WCB) is not available with custom angles. Available in 90 degrees only.


Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint.


12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Available with Flush (F), Bottom Glow (BG), 1" Drop Down Lens (DL), White Cross Blade Baffle (WCB), Hollowed Ellipse Louver (LHE), Hex Louver (LHC), and Regressed downlight diffusers (RG). 1" Drop Down Lens made of highly efficient acrylic. Available with a solid endcap or an endcap with a diffuse filler to continue the luminous aesthetic.


Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.


90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.


Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. Dali driver also available; Contact factory.


LUTES1 (Hi-lume 1%EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LUTES5 (5-Series 5% EcoSystem (LDE5 Series)), LUT2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.

Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732


Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum fixture length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum fixture length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode.


Integrated PIR (Passive Infrared) occupancy or daylight sensors available with Flush, Bottom Glow, White Cross Blade Baffle, and Regressed downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.


Fixture hangs securely from mounting brackets fastened directly to the wall for easy installation. Fixture stands 0.5" off the wall. The mounting bracket is concealed behind the fixture.


Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors.


Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps.


Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32”). 12-foot maximum section length. Hollowed Ellipse Louver (LHE), Hex Louver (LHC), and White Cross Blade Baffle (WCB) are available in 1' increments.


Fixture and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.130 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2011/65/EU.


2.8 lb/ft.


Configurations of this product are listed on the DLC Qualified Products List (QPL). Contact factory for Regressed luminaire qualification.


10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Sales Terms and Conditions  |  Site Map