Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
ID
ID
D
D
WW-D
WW-D
I
I
WM-ID
WM-ID
WM-D
WM-D
WM-I
WM-I
RECESSED
RECESSED
WW-RECESSED
WW-RECESSED
SM
SM
WW-SM
WW-SM
WW-AM
WW-AM
Overview Options Specifications Images

Photometry

HP-4 ID WSO Photometry

HP-4 ID WSO
3500K, Very High Output (V)

Total lumens: 7978
lumens/foot: 1995
lumens/watt: 109

 

HP-4 ID Photometry

HP-4 ID
3500K, Very High Output (V)

Total lumens: 7886
lumens/foot: 1972
lumens/watt: 106

 

Indirect/Direct Specifications

CONSTRUCTION

Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.

ENDCAPS

Flat diecast aluminum endcaps add 1/4" to each end of luminaire.

MITERED CORNERS

Illuminated 90° corners in a single plane, with Top Glow™ or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90° minimum on inside corners), contact factory.

REFLECTORS

Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint.

UPLIGHT OPTION

Patented Top Glow frost white diffuser standard. 12 ft. maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Widespread Optic (WSO) and Widespread Optic with Top Glow (WSOTG); WSO enables increased luminaire spacing with improved ceiling uniformity. Asymmetric optic directs light in a specific direction. ASY-L distributes light to the left, ASY-R distributed light to the right of the luminaire.

DOWNLIGHT OPTION

12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Bottom Glow™ frost white snap-in diffuser option, 73% transmissive, 99% diffusion.

LIGHT OUTPUT

Four lumen packages available; Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.

DRIVER

Replaceable 120V/277V and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Separate dimming for uplight and downlight available. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factorychoice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section (downlight only) will be illuminated in emergency mode.

 
LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

LUTRON DRIVER OPTIONS

Lut3W-3-wire, LutES EcoSystem, Lut2W-2-wire.

INTEGRATED SENSORS

Integrated PIR (Passive Infrared) occupancy or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.

MOUNTING

50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150".

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14- gauge feed used when luminaire current exceeds 5 amps.

LENGTHS

Any length, 2-foot minimum, in increments down to 1/16th-inch (±1/32"). 12-foot maximum section length.

LABELS

Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

3.4 lb/ft.

DLC QUALIFIED

Configurations of this product are listed on the DLC Qualified Products List (QPL).

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map