Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
Flat diecast aluminum endcaps add 0.25" to each end of luminaire.
Illuminated 90° corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90° minimum on inside corners), contact factory.
Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint.
12' maximum lens length. Flush frost white snap-in lens standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Bottom Glow™ frost white snap-in lens option, 73% transmissive, 99% diffusion.
Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.
90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD) < 20%. Expected driver lifetime: 100,000 hours.
LUTRON DRIVER OPTIONS
Lut3W-3-wire, LutESEcoSystem, Lut2W-2-wire.
Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732