Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
Flat diecast aluminum endcaps add 1/4" to each end of luminaire. Drop Down Lens Illuminated Endcap (DE) includes diffuse element to continue luminance of drop lens. Open Endcap (OE) is for use with the Hollowed Ellipse Louver (LHE); following the curve of the louver.
Illuminate 90° corners in a single plane, available with Flush Diffuser, Bottom Glow Diffuser, 1” Drop Down Lens, Regressed Diffuser, or White Cross Blade Baffle. Contact factory for custom angles. 90 degree corners not available with Hollowed Ellipse Louver (LHE) or Hex Louver (LHC).
Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint.
12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Available with Flush (F), Bottom Glow (BG), 1" Drop Down Lens (DL), White Cross Blade Baffle (WCB), Hollowed Ellipse Louver (LHE), Hex Louver (LHC), and Regressed downlight diffusers (RG). 1" Drop Down Lens made of highly efficient acrylic. Available with a solid endcap or an endcap with a diffuse filler to continue the luminous aesthetic.
Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.
90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. Dali driver also available; Contact factory.
LUTRON DRIVER OPTIONS
LUTES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LUTES5 (5-Series 5% EcoSystem (LDE5 Series)), LUT2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)).
Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum fixture length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum fixture length. Backup batteries deliver 1854 lumens. Half of a 4' section will be illuminated in emergency mode.
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
¹ Extended lead time, consult factory for lead time
² Not available for curved sections
³ Linear only