Wall Mount-Indirect Specifications

CONSTRUCTION

Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
 

ENDCAPS

Flat diecast aluminum endcaps add 1/4" to each end of luminaire.
 

MITERED CORNERS

Illuminated 90° corners in a single plane with Top Glow™ and Flush uplight diffuser options. Custom angles are available (90° minimum on inside corners). Contact factory.
 

REFLECTORS

Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint.
 

UPLIGHT OPTION

Patented Top Glow frost white diffuser standard. 12 ft. maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Asymmetric optic directs light in a specific direction. ASY-R distributed light to the right of the luminaire.
 

LIGHT OUTPUT

Four lumen packages available, Standard (B), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.
 

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
 

DRIVER

Replaceable 120V/277V and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours.
 

LUTRON DRIVER OPTIONS

LutES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LutES5 (5-Series 5% EcoSystem (LDE5 Series)), Lut2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.
 

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 12' minimum luminaire length for low profile battery pack. Backup batteries deliver 1608 lumens. Half of a 4' section will be illuminated in emergency mode.
 

INTEGRATED SENSORS

Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.
 

MOUNTING

Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire stands 1/2" off the wall. The mounting bracket is concealed behind the luminaire.
 

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac RAL colors.
 

FEED

Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available.
 

LENGTHS

Any length, 2-foot minimum, in increments down to 1/16" (± 1/32"). 12-foot maximum section length.
 

LABELS

Fixture and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.130 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2011/65/EU.
 

WEIGHT

2.3 lb/ft.
 

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.
 

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.