Precision-cut extruded aluminum body. Internal joiner system, Plug-together wiring, standard.
Solid diecast aluminum endcaps close in form and add 1/4" to each end of luminaire.
Corners are secured with joining brackets for tight connection. Square and rectangular configurations are available. Minimum 4' length for each leg of configurations. Each corner is made up of two reflector sections 2' long.
High diffuse reflectance film with matte white finish. UV stable, abrasion resistant, and anti-static.
Direct distribution is totally open with unique polymer reflector material that helps define the rectilinear form.
Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.
90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
Replaceable 120V/277V and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10v dimming controls with a range of 10%-100%. Dimming to 1% is available; consult factory. Expected driver lifetime: 100,000 hours.
LUTRON DRIVER OPTIONS
LUTES1 (Hi-lume 1%EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LUTES5 (5-Series 5% EcoSystem (LDE5 Series)), LUT2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.
Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. Chicago Plenum option. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 2030 lumens. Half of a 4' (one side) section will be illuminated in EM mode. Solid Endcap (SE) required at end with a battery pack.