Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
Overview Options Specifications Images


E2-ID Photometry

E2-ID Linear
3500K, Very High Output (V) /
Very High Output (V)
Total lumens: 3690
Lumens per watt: 99

E2 Indirect/Direct Linear Specifications


Precision cut 6061-T6 extruded aluminum body with diecast aluminum endcaps. Top Glow™ diffuser snaps into place and is easily removed for service.


Flat diecast aluminum endcaps add 1/4" to each end of luminaire.


The Top Glow™ diffuser is frost white standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced ceiling uniformity. Optional: Flush frost white snap-in diffuser.


Flush frost white snap-in diffuser standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced distribution.


Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage.


The replaceable light engines are made up of high performance mid-power LEDs and designed to distribute heat properly to maximize the life of the LEDs and the driver.


90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.


Replaceable 120V/277V and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1%available; consult factory. Driver for Low Profile T-Bar Power Supply Box is accessible from above the ceiling. Driver for Large Capacity and Retrofit Power Supply Box are fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD): <20%. Step-dimming driver (limited programable outputs. Contact Factory). Expected driver lifetime: 100,000 hours.


120V or 277V prewired. Emergency to generator/inverter wiring, internal generator transfer switch. See Tech Sheet for more information. EM battery backup (4' only) will use a BSL722 in hard lid ceiling applications where above ceiling access is not available. Backup batteries deliver 1542 lumens.


Integrated Occupancy Sensors can be located in the canopy. Sensors are available when using the following power supply boxes: Low Profile T-Bar (P01), Large Capacity (P02), and Retrofit (P03) power supply boxes. Sensors not avail-able with 3" canopy.


Standard E2-ID Linear mounting is off-grid. Bar Hangers for mounting power supply boxes to joists are ordered separately. Consult Electrical Box Options (Page 2) for maintenance details.


Finelite Signal White powder coat finish stan-dard. Optional Adders: 185 RAL colors.


Standard suspension is conductive feed/suspension cable. The adjustable power cable (APC) comes standard in 50" length. 4-conductor cable standard delivering independent up light and downlight control. Field adjustable length. Max support spacing every 8'.


Any length, 2-foot minimum, in increments down to 1/16" (± 1/32"). 8-foot maximum section length.


1.0 lb per foot. 4' E2-ID linear weighs 4 lbs.


Luminaire and electrical components are ETL-listed conforming to UL 2108 in the U.S.A. and CAN/CSA C22.2#9.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an inter-nal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2011/65/EU. Power supply boxes are IC Rated. Chicago Plenum available.


10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individ-ual manufacturer warranties.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Sales Terms and Conditions  |  Site Map