Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
CONFIGURATION-ID
CONFIGURATION-ID
LINEAR-ID
LINEAR-ID
Overview Options Specifications Images

Photometry

E2-ID Photometry

E2-ID Linear
3500K, Very High Output (V) /
Very High Output (V)
Total lumens: 3690
Lumens per watt: 99

E2 Indirect/Direct Linear Specifications

CONSTRUCTION

Precision cut 6061-T6 extruded aluminum body with aluminum endcaps. Top Glow™ diffuser snaps into place and is easily removed for service.

ENDCAPS

Flat diecast aluminum endcaps add 1/4" to each end of luminaire.

UPLIGHT DIFFUSER

The Top Glow™ diffuser is frost white standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced ceiling uniformity. Optional: Flush frost white snap-in diffuser.

DOWNLIGHT DIFFUSER

Flush frost white snap-in diffuser standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced distribution.

LIGHT OUTPUT

Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage.

LIGHT ENGINE

The replaceable light engines are made up of high performance mid-power LEDs and designed to distribute heat properly to maximize the life of the LEDs and the driver.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver for Low Profile T-Bar Power Supply Box is accessible from above the ceiling. Driver for Large Capacity and Retrofit Power Supply Box are fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD): <20%. Stepdimming driver (limited programable outputs. Contact Factory). Expected driver lifetime: 100,000 hours.

ELECTRICAL

120V or 277V prewired. Emergency to generator/inverter wiring, internal generator transfer switch. EM battery backup will use a BSL722 in hard lid ceiling applications where above ceiling access isn't available.

 
INTEGRATED SENSORS

Integrated Occupancy Sensors can be located in the canopy. Sensors are available when using the following power supply boxes: Large Capacity, Low Profile T-Bar, and Retrofit power supply boxes.

MOUNTING

Standard E2-ID Configuration mounting is off-grid. Bar Hangers for mounting power supply boxes to joists are ordered separately. Consult Electrical Box Options (Page 2) for maintenance details.

FINISH

Finelite Signal White powder coat finish standard. Optional Adders: 185 RAL colors.

SUPPORT CABLE/FEED

Standard suspension is conductive feed/suspension cable. 4-conductor cable standard delivering independent up light and downlight control. 5-conductor cables when using battery backup. Field adjustable length.

STANDARD CONFIGURATIONS

Available in 2x2, 2x3, 2x4, 3x3, 3x4, and 4x4 sizes.

WEIGHT

1.0 lb per foot. 2'x2' weighs 8 lbs.

LABELS

Luminaire and electrical components are ETL-listed conforming to UL 2108 in the U.S.A. and CAN/CSA C22.2#9.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC. Power supply boxes are IC Rated. Chicago Plenum available.

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map