Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
P
P
PW
PW
FP
FP
I
I
Overview Options Specifications Images
lamping and photometry

Series 8-PW Specifications

DIMENSIONS

3.0" high, 9.25" wide.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are hard-tooled to tolerances of 0.010". precision-punched 0.062" diameter perforations (P) Cover the bottom side of the fixture in two parallel Columns. BAFFLES: Perforated baffles in two window sections per 4' fixture.

ENDCAPS

Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, add 0.1ô€€€ at each end. Optional: Rounded Endcap (RE), injection molded sculpted endcap with 0.100ô€€€ reveal. No exposed fasteners, holes or knockouts. Rounded endcap adds 5.105ô€€€ at each end. REFLECTORS: Die-formed prepainted aluminum, (91W). Virgin acrylic-UV-stabilized lens diffuser over perforations is standard. Optional: Extended Performance Reflector System. ACCESSORIES: Optional dust cover, clear acrylic. NOTE: Will significantly impact light level performance. Consult Factory. CORNER: Optional one piece die-formed 90 corner. Contact factory.

ELECTRICAL

120, 277, 347V prewired. Fixture and electrical components are UL and C-UL listed and fixture will bear UL and C-UL labels. Optional Adders: Dual circuit, emergency circuits, emergency battery packs. Contact factory.

LAMPING

Available in 2, 3, and 4 T8 lamp cross sections. 2-lamp is outboard.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF is standard. Specify ballast factor if not standard (contact factory). Optional adders: rapid-start ballasts, 347V, emergency battery packs, dimming ballasts (controls by others). One ballast every 4' maximum.

 
MOUNTING OPTIONS

Semi-adjustable aircraft cable, (AC) ± 0.5" in lengths of 12",15", 18", 21", 24", 27", 30", And 36". Order length, e.g., AC 18". Optional Adders: Fully adjustable aircraft cable (FA) in lengths up to 250". Rigid stems (Stem).

SUPPORT CABLES

Plated steel cable and hardware.

FEED

18-gauge straight cord. 14-gauge feed cord used when fixture current exceeds 5 amps. Optional Adders: Coil Cord Feed, Rigid Stem Feed.

FINISHES

Signal White standard (fixture). RAL 7047 (light gray) standard (baffle). Optional Adders: 185 Colors available from Tiger Drylac's RAL color chart.

LENGTHS

4', 8', and 12' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 5.0 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels. sEE ALSO: Series 8-P (perforated), Series 8-I (100% indirect), and Series 8-FP (fully perforated ) technical sheets.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map