DIMENSIONS
3.0" high, 9.25" wide.
CONSTRUCTION
Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are hard-tooled to tolerances of 0.010". precision-punched 0.062" diameter perforations (P) Cover the bottom side of the fixture in two parallel Columns. Optional: Series 8 100% Indirect (I).
ENDCAPS
Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, add 0.1" at each end. Optional: Rounded Endcap (RE), injection molded sculpted endcap with 0.100 " reveal. No exposed fasteners, holes or knockouts. Rounded Endcap adds 5.105" at each end. REFLECTORS: Die-formed prepainted aluminum, (91W). Virgin acrylic UV-stabilized lens diffuser over perforations is standard. Optional: Extended Performance Reflector System (EP). Optional Dust Cover for T8 lamps only. Contact factory.
ACCESSORY
Optional Dust Cover, clear acrylic. NOTE: Will significantly impact light level performance. Consult Factory. CORNER: Optional one piece die-formed 90° corner. Consult Factory.
ELECTRICAL
120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V prewired, dual circuit, emergency circuits, emergency battery packs. Contact factory.
LAMPING
Available in 1, 2, or 3 T8 lamp cross sections.
BALLAST
Electronic instant-start ballast <10% THD, 0.88 BF is standard. Specify ballast factor if not standard (contact factory). Optional adders: rapid-start ballasts, 347V, emergency battery packs, dimming ballasts (controls by others).