Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
P
P
I
I
WM
WM
Overview Options Specifications Images
lamping and photometry

Series 5-I Specifications

DIMENSIONS

2.4" high, 9.5" wide.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hard-tooled to tolerances of 0.010". precision-punched 0.062" diameter perforations cover the bottom side of the fixture in two parallel columns.

ENDCAPS

Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, adds 0.1" at each end. Optional: Recessed Endcap (XE), die-cast aluminum Recessed Endcap with 1/8" reveal. Recessed endcap adds 1.5" each end. Optional: Rounded Endcap (RE), injection molded sculpted endcap with 1/8" reveal. No exposed fastners, holes or knockouts. Rounded Endcap adds 5.675" at each end.

REFLECTORS

Die-formed prepainted aluminum, 91% Reflective white. Virgin acrylic UV-stabilized lens diffuser over perforations is standard. Options: Extended performance reflector (EP) with 95% reflective specular components; fully specular reflector system (SPEC) with specular slotted side reflectors. Optional Dust Cover for T8 lamps only. Contact factory.

SUPPORT CABLES

Plated steel cable and hardware.

MOUNTING OPTIONS

Semi-adjustable aircraft cable (±0.5") in lengths of 12", 15", 18", 21", 24", 27", 30", and 36". Optional Adders: fully adjustable aircraft cable in lengths up to 150". Rigid stems.

FINISHES

Signal White standard. Optional Adders: 185 Colors available from Tiger Drylac's RAL color chart.

 
LAMPING

Available in 2-or 3-lamp cross sections with T8, T5, and T5HO lamps.

FEED

18-gauge straight cord. 14-gauge feed cord used when fixture current exceeds 6 amps. Optional Adders: Coil Cord Feed, Rigid Stem Feed.

ELECTRICAL

120 or 277V prewired. Plug-together wiring standard. Fixture and electrical components are UL and CUL listed and fixture will bear UL and C-UL labels. Optional Adders: dual circuit, emergency circuits, low-profile emergency battery packs. Contact factory.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5HO lamps. Optional Adders: rapid-start ballasts (standard for T5/T5HO), 347V, Emergency battery packs, dimming ballasts (controls by others). Requires low-profile ballasts and battery packs.

LENGTHS

4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 2.5 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map