Series 2 Specifications

DIMENSIONS

3.25" high, 12" wide. Blades spaced 1.5" apart.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hard-tooled to tolerances of 0.010".

ENDCAPS

Finelite Brite White Standard, 96% reflective.

REFLECTORS

Die-formed, perforated prepainted aluminum, standard (91W).

SUPPORT CABLES

Plated steel cable and hardware.

MOUNTING OPTIONS

Semi-adjustable aircraft cable, (AC) ± 0.5" in lengths of 12", 15", 18", 21", 24", 27", 30", And 36". Order length, e.g., AC 18". Optional Adders: fully Adjustable aircraft cable (FA) in lengths up to 150". Rigid stems (Stem).

FINISHES

Finelite Brite White Standard, 96% reflective.

LAMPING

Available in 2 T8 lamp cross sections.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 6 amps. One feed supplies each run of fixtures. Optional Adders: Coil Cord Feed, Rigid Stem Feed.

SERIES 2 CONFIGURATIONS

Optional: Square and rectangular configurations with 90° corner channel extensions. Mitered 90° corner connector available on 4' x 4' square only. Consult factory.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V prewired, dual circuit, Emergency circuits, emergency battery packs. Contact factory.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF is standard. Specify ballast factor if not standard (contact factory). Optional adders: rapid-start ballasts, 347V, emergency battery packs, dimming ballasts (controls by others).

LENGTHS

4', 8', and 12' section lengths can be combined to make longer runs.

WEIGHT

Fixture weight = 2.5 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.