Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
Standard 4', 6', and 8' section lengths can be combined to
make longer runs. Contact factory for additional lengths. See page 5 for
standard length combinations.
Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). For Tailored Outputs outside of range from Standard (S) to Very High (V), consult factory. Light engines are replaceable.
8' maximum diffuser length. Frost white diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers creates soft transition on vertical surfaces.
90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
Internal components finished in high reflectance white paint. Diffusers are coextruded frost acrylic with high reflectance white.
STATIC WHITE DRIVER
Replaceable 120V, 277V, and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; Consult factory. Driver is fully accessible from below the ceiling.
– Power Factor: ≥ 0.9
– Total Harmonic Distortion (THD): <20%
– Expected driver lifetime: 100,000 hours
LUTRON STATIC DRIVER OPTIONS
– LUTES1 Hi-lume 1% EcoSystem with Soft-On, Fade-to-Black dimming (LDE1 series)
– LUTES5 5-Series 5% EcoSystem (LDE5 Series)
– LUT2W Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series);
Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. A factory-choice low-profile backup battery is available (8'. minimum fixture length). Backup batteries deliver 2330 lumens. A 4' section will be illuminated in emergency mode
50" Fully Adjustable (FA) plated steel aircraft cable with
safety stop hardware standard. Contact factory for additional lengths up
Cast aluminum Glow Endcap (FE) is standard with injection molded diffusers adds 1/8" to each end.
Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery.
|Minimum Housing Length
|EM Lumen Output
|EM Section Illuminated
||2' or 4'
1 Minimum fixture housing length for battery pack approved without sensor
Finelite Signal White (SW) powder coat standard. Finelite Black (RAL 9005) with semi gloss fine texture (FB)* and satin Aluminum (SA)* are available. Optional Adders: 185 RAL colors*. Paintable surfaces include the center element visible from below, the top metal wireway cover (above), and the cast aluminum endcaps and joiner pieces.
Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps.
Fixture and electrical components are ETL-listed conforming to UL 924 and UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.130 (G), this luminaire contains an internal driver disconnect. UL 924 and UL 2108 - PoE options available on request. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive (EU) 2015/863. Finelite makes the specification process easy when putting healthier products on your projects. Simply add – RLA (Red List Approved) or – RLD (Declared Label) to your part number.
10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.
* 20 Business day lead time for color