Series 18 LED Wall Mount 2-Engine Specifications

CONSTRUCTION

Body is 20-gauge die-formed steel with an 18-gauge die-formed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of +/- 0.010".

ENDCAPS

The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 0.10" at each end. The optional Extended Endcap (EE) is an aluminum die-cast endcap and adds 0.55" at each end.

REFLECTORS

Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint.

UPLIGHT OPTICS

The 2E optical system is open, standard. Optional: Frosted Top Optic (FTO) and Clear Top Optic (CTO), available.

SHIELDING

Diffusers are 73% transmissive with 99% diffusion. Luminaires are available with two distinct shielding options:

CS Continuous Shielding (CS) is standard with a maximum 8' length. The visible diffuse area is 7'9" centered on an 8' housing.

SG Segmented Shielding (SG) option available.

LIGHT OUTPUT

Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD) < 20%. Expected driver lifetime: 100,000 hours.

LUTRON DRIVER OPTIONS

LutES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LutES5 (5-Series 5% EcoSystem (LDE5 Series)), Lut2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. A factory-choice low-profile backup battery is available (8' minimum fixture length). Backup batteries deliver 1600 lumens. A 4' section will be illuminated in emergency mode.

INTEGRATED SENSORS

Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.

MOUNTING

Surface Mount (SUR) is standard with the luminaire bolting directly into existing wall studs. Optional Mounting Brackets (MB) in 4' and 8' lengths attach to the wall and the fixture hangs on the bracket 0.5" off the wall. The mounting bracket is concealed behind the fixture

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac’s non-metallic RAL colors.

FEED

Standard with one 18-gauge/5-conductor singlecircuit feed. 14-gauge feed used when fixture current exceeds 5 amps.

LENGTHS

Standard 4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

LABELS

Fixture and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

2.5 lb/ft.

DLC QUALIFIED

Configurations of this product are listed on the DLC Qualified Products List (QPL).

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.