Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
Overview Options Specifications Images
lamping and photometry

Series 18WM Specifications


1.9" high, 7.6" wide. Distance from Curved Balancer Assembly to top of fixture is 4.0".


Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hard-tooled to tolerances of 0.010".


(FE) Flat endcap, 14 gauge dieformed steel, Adds 0.1 at each end. Optional: (EE) Extended rounded endcap used with Mounting Bracket option only.


Semi-specular Aluminum 94% reflective.


Diffuse Center Optic (DCO) standard. 73% transmissive, 99% diffusion.


Optional Dust Cover for T5 only, clear acrylic. NOTE: Will significantly impact light level performance. Contact Factory.


120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: prewired dual circuit, emergency circuits, low-profile emergency battery packs. Contact factory.


S18WM can be specified with integrated sensors from Wattstopper, Philips, and Lutron. Daylight Sensors: Wattstopper sensors can be supplied with either a closed loop 0-10v dimming (handheld remote supplied) or closed loop single zone switching system. The Lutron sensor is directional and for use with Ecosystem ballasts. The Philips sensor is a closed loop 0-10v sensor for use with Advance Mark 7 ballasts. Occupancy Sensor: Wattstopper occupancy sensor is a PIR sensor with additional hold-off daylight feature. Sensor cross section limited to 1.3" wide and 1.0" high.


Available in 1 T8, and 1,2 or 3 T5 or T5HO lamp cross sections.


Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5 or T5HO lamps. Optional adders: rapid-start ballasts (standard for T5 or T5HO), emergency battery packs, dimming ballasts (controls by others). Requires low profile ballasts and battery packs. Ballast cross section limited to 1.3" wide and 1.0" high.


Standard (SUR) Surface Mount, fixture is bolted directly into existing wall studs. Optional (MB) Mounting Bracket, fixture hangs from bracket fastened directly to wall. Mounting bracket in 4', 8' lengths. Fixture hangs 0.5" from wall. Mounting bracket is Concealed behind fixture.


18 gauge wire. 14 gauge wire used when fixture current exceeds 6 amps.


Finelite Signal White standard. Optional Adders: 185 colors available from Tiger Drylac's RAL color chart.


4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.


Fixture weight = 2.5 lb/ft.


Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Sales Terms and Conditions  |  Site Map