Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
DEFAULT
DEFAULT
WM
WM
Overview Options Specifications Images
lamping and photometry

Series 18 Specifications

DIMENSIONS

1.9" high, 7.6" wide. Distance from Curved Balancer Assembly to top of fixture is 4.0".

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hard-tooled to tolerances of 0.010".

ENDCAPS

(FE) Flat endcap, 14 gauge dieformed steel, Adds 0.1 at each end. Optional: (EE) Extended endcap, Aluminum die-cast endcap, adds 0.55" at each end.

REFLECTORS

Semi-specular Aluminum 94% reflective.

DOWNLIGHT SHIELDING OPTIONS

Diffuse Center Optic (DCO) standard. 73% transmissive, 99% diffusion.

ACCESSORY

Optional Dust Cover for T5 only, clear acrylic. Contact factory. NOTE: Will significantly impact light level performance. Contact Factory.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: prewired dual circuit, emergency circuits, low-profile emergency battery packs. Contact factory.

INTEGRATED SENSORS

S18 can be specified with integrated sensors from Wattstopper, Philips, and Lutron. Daylight Sensors: Wattstopper sensors can be supplied with either a closed loop 0-10v dimming (handheld remote supplied) or closed loop single zone switching system. The Lutron sensor is directional and for use with Ecosystem ballasts. The Philips sensor is a closed loop 0-10v sensor for use with Advance Mark 7 ballasts. Occupancy Sensor: Wattstopper occupancy sensor is a PIR sensor with additional hold-off daylight feature. sensor cross section limited to 1.3" wide and 1.0" high.

BALLAST

Electronic program start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5 or T5Ho lamps. Optional adders: emergency battery packs, dimming ballasts (controls by others). Requires low profile ballasts and battery packs. Ballast cross section limited to 1.3" wide and 1.0" high.

 
LIGHT ENGINE

Available in 1 T8, and 1,2 or 3 T5 or T5HO lamp cross sections.

MOUNTING

(FA) 50" fully adjustable aircraft cable standard with safety stop. Contact factory for additional lengths up to 150". Mounting connects to fixture with factory-installed curved balancer, which allows for side-to-side fixture leveling and locks it into place. Note: Curved balancer assembly is 2.28" for standard or 2.8" with FM above top of fixture. Optional (AC) semi-adjustable aircraft cable (± 0.5") in lengths of 12", 15", 18", 21", 24", 27", 30", and 36".

OPTIONAL FLEXIBLE MOUNTING BRACKET

The Flexible Mounting Bracket adjusts along the length of the luminaire to accommodate existing mounting points.

SUPPORT CABLES

Plated steel cable and hardware.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 5 amps. Optional Adders: Coil Cord Feed.

FINISHES

Finelite Signal White standard. Optional Adders: 185 colors available from Tiger Drylac's RAL color chart.

LENGTHS

4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 2.5 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map