Series 17 LED ACF Specifications

CONSTRUCTION

Fixture channel is 6063-T6 extruded aluminum. Fascia covers are die-formed 20-gauge steel. Mounting clips are constructed from 22-gauge die-formed steel. All components are hard-tooled to tolerances of +/- 0.010".

ENDCAPS

Flat endcap, 14-gauge die-formed steel, adds 0.1" to each end.

REFLECTORS

96W standard reflector, die-formed painted steel, 96% reflectance white finish. Virgin acrylic UV stabilized lensed diffuser behind perforated fascia is standard.

DIFFUSERS

Standard with top 0.080" and bottom 0.060" frosted acrylic diffusers

LIGHT OUTPUT

Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

DRIVER

Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥0.9. Total Harmonic Distortion (THD) < 20%. Step-dimming driver (limited programable outputs. Contact Factory). Expected driver lifetime: 100,000 hours.

LUTRON DRIVER OPTIONS

LutES1 (Hi-lume 1% EcoSystem with Soft-On, Fade to Black dimming (LDE1 series)); LutES5 (5-Series 5% EcoSystem (LDE5 Series)), Lut2W (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)); Contact factory for availability of discontinued Lutron drivers, L3DA-3-wire and L3DA EcoSystem.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, backup battery. Factory-choice, low-profile, battery backup delivers 800 lumens (ACF) or 1400 (VCF). Minimum luminaire length for battery pack: 8’. The downlight alway will be illuminated in the 4' section.

INTEGRATED SENSORS

Available with integrated ultrasonic occupancy sensors. Not available on 2’ luminaries.

MOUNTING

Standard with mounting clips to the wall and not visible from normal viewing angles once installed. One mounting clip is provided for every 16 inches of luminaire for a secure connection to the wall. Luminaire is snapped into place on the mounting clips and secured using locking screws.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps. Optional 6' flex conduit whips available.

FINISHES

Finelite Signal White is standard. Optional adders: 185 finishes available from Tiger Drylac’s RAL color chart.

LENGTHS

Modular section lengths of 2', 3', 4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

LABELS

Fixture and electrical components are ETLlisted conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

Fixture weight = 2 lb/ft.

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.

TUNABLE WHITE

Refer to the tunable white tech sheet for more information.