Series 16 LED Wall Mount 3 Engine Specifications

CONSTRUCTION

Body is 20-gauge die-formed steel with an 18-gauge die-formed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of +/- 0.010".

ENDCAPS

The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 0.10" at each end. The optional Extended Endcap (EE) is an aluminum die-cast endcap with a 0.10" reveal adding 2.5" at each end.

OPTICS & DISTRIBUTION RATIOS

SHIELDING

Diffuse Center Optic (DCO), 73% transmissive, 99% diffusion. Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 40% round perforations white/white. White Cross Baffle (WCB), 87 cell baffles spaced 1/2" apart and finished with 96% reflective white paint.

LIGHT OUTPUT

2E & 3E; Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). 4E; three lumen packages available, Standard Output (S), 3000 lumens, Boosted Standard (B), 4000 lumens, High Output (H), 5000 lumens. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable.

LUMEN MAINTENANCE

90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.

ELECTRICAL

Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery.

2E WALL MOUNT: A factory-choice low-profile backup battery is available (8' minimum fixture length). Backup batteries deliver 1700 lumens. A 4' section will be illuminated in emergency mode.

3E WALL MOUNT: A factory-choice low-profile backup battery is available (8' minimum fixture length). Backup batteries deliver 1500 lumens. The down-light engine will be illuminated in a 4' section in emergency mode.

4E WALL MOUNT: A factory-choice low-profile backup battery is available (8' minimum fixture length). Backup batteries deliver 1500 lumens. The down-light engine will be illuminated in a 4' section in emergency mode.

DRIVER

Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: ≥ 0.9. Total Harmonic Distortion (THD) < 20%. Expected driver lifetime: 100,000 hours.

LUTRON DRIVER OPTIONS

Lut3W-3-wire, LutESEcoSystem, Lut2W-2-wire.

INTEGRATED SENSORS

Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info.

MOUNTING

The standard mount is a hidden bracket constructed of 14-gauge steel mounted to the luminaire using #10 screws. Two brackets are provided for every luminaire section. A leveling screw is included to ensure the luminaire is perpendicular to the vertical wall surface.

FINISHES

Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac’s non-metallic RAL colors.

FEED

Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps.

LENGTHS

Standard 4' and 8' section lengths can be combined to make longer runs. Contact factory additional lengths.

LABELS

Fixture and electrical components are ETLlisted conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC.

WEIGHT

3.0 lb/ft.

DLC QUALIFIED

Configurations of this product are listed on the DLC Qualified Products List (QPL).

WARRANTY

10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.