Series 16WM Specifications

DIMENSIONS

2.25" high, 8.0" wide.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are hard-tooled to tolerances of 0.010".

ENDCAPS

(FE) Flat endcap standard, 14 gauge dieformed steel, adds 0.1" at each end.

REFLECTORS

(91W) Die-formed pre-painted aluminum, 91% reflective white. Optional: (EP) Extended Performance reflector system (1T5HO only).

UPLIGHT OPTICAL OPTIONS

Open - No optical control. STO - Soft Top Optics, 0.063" perforations cover the top surface; 96% reflective white paint. TDO - Totally Direct Optic, solid top above lamps, 0/100; 96% reflective white paint.

SHIELDING OPTIONS

DCO - Diffuse Center Optic, 73% transmissive, 99% Diffusion.

WCB - White Cross Blade Baffle, 87 cell baffles spaced 0.5" apart and finished with 96% Reflective white paint.

SSL - Semi Specular Louver, 44 cell louvers spaced 1.0" apart.

ACCESSORY

Optional Dust Cover, clear acrylic, T8 lamps only. NOTE: Will significantly impact light level performance. Contact Factory.

ELECTRICAL

120V or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: Low profile 347V Ballast, prewired dual circuit, emergency circuits, lowprofile emergency battery packs. Contact factory.

LAMPING

Available in 1, 2, or 3 T8, T5, or T5HO lamp cross sections.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5Ho lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others). Requires lowprofile ballasts and battery packs.

MOUNTING OPTIONS

Standard mount is hidden bracket. Brackets constructed of 14-gauge steel and mount to luminaire using #10 screws. Two brackets Are provided for every luminaire section. A leveling screw is included to ensure luminaire is perpendicular to vertical surface.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 5 amps.

FINISHES

Finelite Signal White standard. Optional Adders: 185 colors available from Tiger Drylac's RAL Color chart.

LENGTHS

4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 3.0 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.