1.9" high, 7.6" wide. Distance from Curved Balancer Assembly to top of fixture is 4.0".
Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are hard-tooled to tolerances of 0.010".
(FE) Flat endcap standard, 14 gauge dieformed steel, adds 0.1" at each end. Optional: (EE) Extended Endcap, aluminum die-cast endcap with 0.100" reveal, adds 2.5" at each end.
(91W) Die-formed pre-painted aluminum, 91% reflective white. Optional: (EP) Extended Performance reflector system (1T5HO only). (WSO) Wide Spread Optic for 1T8 or 1T5HO. Optional Dust Cover for T8 lamps only. Contact factory.
UPLIGHT OPTICAL OPTIONS
Open No optical control.
CCO Controlled Center Optics, covers center lamp, 100% downlight (center only); 96% Reflective white paint.
STO Soft Top Optics, 0.063" perforations cover the top surface; 96% reflective white paint.
TDO Totally Direct Optic, solid top above lamps, 0/100; 96% reflective white paint.
DCO Diffuse Center Optic, 73% transmissive, 99% Diffusion.
WCB White Cross Blade Baffle, 87 cell baffles spaced 0.5" apart and finished with 96% Reflective white paint.
SSL Semi Specular Louver, 44 cell louvers spaced 1.0" apart.
Optional Dust Cover, clear acrylic, T8 lamps only. NOTE: Will significantly impact light level performance. Contact Factory.
Series 16 can be specified with integrated sensors from Wattstopper, Philips, and Lutron. Daylight Sensors: Wattstopper sensors can be supplied with either a closed loop 0-10v dimming (handheld remote supplied) or closed loop single zone switching system. The Lutron sensor is directional and for use with Ecosystem ballasts. The Philips sensor is a closed loop 0- 10v sensor for use with Advance Mark 7 ballasts. Occupancy Sensor: Wattstopper occupancy sensor is a pIR sensor with additional hold-off daylight feature.