Series 14WM Specifications

DIMENSIONS

Overall 2.0" high, 8.0" wide.

CONSTRUCTION

Body is 18-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring. All components are hard-tooled to tolerances of 0.010".

SHIELDING OPTIONS

DCO - Diffuse Center Optic, 73% transmissive, 99% Diffusion.

WCB - White cross blade baffles.

CS - Concave shield, square perforations.

CP - Concave shield, round perforations.

ENDCAPS

Standard: (FE) Flat endcaps adds 0.1" at each end. Optional: (EE) Extended Endcap, aluminum Die-cast endcap, adds 2.5" at each end.

REFLECTORS

(AA) Standard – Anodized aluminum Diffuse high-reflectance reflectors. Optional (EP) fully specular side reflectors, (WSO) wide-spread optic system for 1 T5HO. Optional Dust Cover for T8 lamps only. Contact factory.ô€€€NOTE: Contact factory when using emergency battery packs, 347V, or dimming ballasts with WSO reflectors.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V ballasts, prewired dual circuit, emergency circuits, emergency battery packs.

LAMPING

1 or 2 T8 or 1, 2 or 3 lamp T5 or T5HO lamp cross sections. 1 T8 lamp is on angle. UV-stabilized lamp diffuser standard for T5HO lamps - 0.100 acrylic. Also available without diffuser (open).

BALLAST

Electronic instant start-ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-startballasts <10% THD, 1.0 BF standard for T5/T5Ho lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others). Requires lowprofile ballasts and battery packs.

MOUNTING OPTIONS

Nickel plated mounting cleat holding aircraft cable gripper assembly is secured to wall. Steel standoffs painted to match the fixture are positioned at 4' intervals (runs) to hold the fixture 0.25" From the wall.

SUPPORT CABLES

Plated steel cable and hardware. stainless steel aircraft cable suspends from mounting Cleat assembly.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 6 amps.

FINISHES

Finelite Signal White standard. 185 colors Available from Tiger Drylac's RAL color chart for a Nominal adder.

LENGTHS

4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 2.0 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.