Finelite
Product ShortcutsProduct Shortcuts|Media Center|Agent Login|Contact|Home
P
P
I
I
ID
ID
WM-P
WM-P
WM-I
WM-I
WM-ID
WM-ID
Overview Options Specifications Images
lamping and photometry
WCB-OPN
DCO

Series 12WM-ID Specifications

DIMENSIONS

2.5" high, 6.3" wide.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are hard-tooled to tolerances of 0.010". s12WM-P ONLY: Precision-punched 0.093" diameter perforations cover the bottom side of the fixture.

ENDCAPS

(FE) Flat Endcap standard, 20-gauge dieformed steel, adds 0.1" at each end. Optional: (CE) Curved Endcap, aluminum die-cast endcap with 0.100" Reveal, add 5.0" at each end. No exposed fasteners, holes or knockouts.

REFLECTORS

Standard (91W) 91 White : Die-formed pre-painted aluminum, 91% reflective white. Optional Extended Performance (EP) reflector system. (S12WM-ID ONLY)

SHIELDING OPTIONS

DCO - Diffuse Center Optic, 73% transmissive, 99% diffusion. WCB - White Cross Blade Baffle, white cross blades with curved bottoms, perforated; PLV - Parabolic Louver, semi-specular louvers with straight edge, spaced approximately 1.0" apart.

ACCESSORY

Optional Dust Cover, clear acrylic. T5 and T8 lamps only. Not suitable for T5HO lamps. NOTE: Will significantly impact light level performance. Contact Factory. ACCESSORY S12WM-P ONLY: Optional Clearperf™ Lens factory installed, semi-translucent opal acrylic, UV stable, covers perforations inside fixture. Standard with 1-T5HO lamp. NOTE: Impacts light level performance. Contact Factory.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V prewired, dual circuit, emergency circuits, low-profile emergency battery packs. Contact factory.

 
LAMPING

Available in 1 or 2 T8, T5, or T5HO lamp cross sections.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5HO lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others). Requires low-profile ballasts and battery packs.

MOUNTING OPTIONS

Standard (SUR) Surface Mount, fixture is bolted directly into existing wall studs. Optional (SO) Standoff Mount, fixture hangs from tapered mounting bracket fastened to wall at fixture ends and joints. Standoff bracket measures 4.5" wide, 6.0" tall, And 0.5" deep. Fixture hangs 0.5" from wall. Feed goes through mount to vertical J-box. Optional (MB) Mounting Bracket, fixture hangs from bracket fastened directly to wall. Mounting bracket in 4', 8' lengths. Fixture hangs 0.5" from wall. Mounting bracket is Concealed behind fixture.

FEED

18 gauge wire. 14 gauge wire used when fixture current exceeds 6 amps. Optional feed uses cord.

FINISHES

Finelite Signal White standard. Optional Adders: 185 colors available from Tiger Drylac's RAL Color chart.

LENGTHS

4' and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 2.0 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.

Finelite Home LinkedInFacebookTwitterYouTubePinterestInstagram A brand of Legrand

© Finelite, Inc. All rights reserved.    Contact Us  |  Privacy Policy  |  Terms of Use  |  Site Map