Series 10WM Specifications

DIMENSIONS

2.9" high, 8.75" wide.

CONSTRUCTION

Body is 20-gauge die-formed steel with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hard-tooled to tolerances of 0.010".

ENDCAPS

Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, adds 0.1" at each end.

REFLECTORS

Standard 91% reflective white (91W) side reflectors. Optional: Extended Performance specular (EP) side reflectors.

UPLIGHT OPTICAL OPTIONS

Open No uplight optical control.

CCO Controlled Center Optics, covers center lamp, 100% downlight (center only);

STO Soft Top Optics, 0.063" perforations cover the top surface;

TDO Totally Direct Optics, solid top above lamps, 0/100.

DOWNLIGHT SHIELDING OPTIONS

DCO Diffuse Center Optic, 73% transmissive, 99% Diffusion.

A12 A12 Diffuser lens, acrylic UV stabilized, 0.100" Thick;

PS Perf Shield, white, curved shield with 0.063" perforations covering the surface;

WCB White Cross Blade Baffle, white cross blades 3.0" apart;

PLV Parabolic Louver, semi-specular louvers 3.0" Apart; ACCESSORIES: Optional Lamp Guard, 063 clear acrylic, UV stabilized; Optional Dust Cover (T8 only), Clear acrylic. NOTE: Will significantly impact light level performance.

ELECTRICAL

UL listed and fixture will bear UL/C-Ul labels. Optional Adders: 347V prewired, dual circuit, Emergency circuits, emergency battery packs.

LAMPING

1, 2, or 3 lamp cross sections with T8 or T5/T5HO lamps. Lamp diffuser included with T5HO lamps.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5HO lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others).

MOUNTING OPTIONS

Standard (SUR) surface mounting bolts fixture into existing wall studs. Fixture fits flush to wall. Optional: mounting bracket (MB) Fixture hangs securely from bracket fastened directly to wall. Mounting bracket in 4' and 8' lengths. Fixture hangs 0.5" from wall. Bracket cap covers end of bracket.

FEED

18 gauge wire. 14 gauge wire used when fixture current exceeds 5 amps. Feed location is 4.5" from end of fixture. Optional feed uses cord.

FINISHES

Finelite Signal White standard. 185 colors Available from Tiger Drylac's RAL color chart for a Nominal adder.

LENGTHS

4', 8' section lengths can be combined to make longer runs. Contact factory for additional lengths.

WEIGHT

Fixture weight = 3 lb/ft. pENDANT MOUNT: Complementary pendant mount available.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.