Series 10 Specifications

DIMENSIONS

2.9" high, 9.5" wide. Distance from Lock and Level™ Assembly to top of fixture is 3".

CONSTRUCTION

Body is 20-gauge die-formed steel body with 18-gauge die-formed internal joiner system, plug-together wiring standard. All components are hardtooled to tolerances of 0.010".

ENDCAPS

Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, adds 0.1" at each end. Optional: Rounded Endcap (RE), injection molded sculpted endcap with 0.100" reveal. No exposed fasteners, holes or knockouts. Rounded Endcap adds 5.125" at each end.

REFLECTORS

Standard 91% reflective white (91W) side reflectors. Optional: Extended Performance specular (EP) side reflectors.

UPLIGHT OPTICAL OPTIONS

Open - No uplight optical control.

CCO - Controlled Center Optics, covers center lamp, 95% downlight (center only);

STO - Soft Top Optics, 0.063" perforations cover the top surface;

TDO - Totally Direct Optics, solid top above lamps, 0/100.

DOWNLIGHT SHIELDING OPTIONS

DCO - Diffuse Center Optic, 73% transmissive, 99% Diffusion.

A12 - A12 Diffuser lens, acrylic UV stabilized, 0.100" Thick;

PS - Perf Shield, white, curved shield with 0.063" perforations covering the surface;

WCB - White Cross Blade Baffle, white cross blades 3.0" apart;

WSB - White Straight Blade Baffle, white blades 3.0" Apart;

PLV - Parabolic Louver, semi-specular louvers 3.0" Apart;

ACCESSORIES

Optional Lamp Guard, 063 clear acrylic, UV stabilized; Optional Dust Cover, clear acrylic. NOTE: Will significantly impact light level performance.

ELECTRICAL

120 or 277V prewired. Fixture and electrical Components are UL/C-UL listed and fixture will bear UL/C-UL labels. Optional Adders: 347V prewired, dual circuit, emergency circuits, emergency battery packs.

INTEGRATED SENSORS

Series 10 can be specified with integrated sensors from Wattstopper, Philips, and Lutron. Daylight Sensors: - Wattstopper sensors can be supplied with either a closed loop 0-10v dimming (handheld remote supplied) or closed loop single zone switching system. The Lutron sensor is directional And for use with Ecosystem ballasts. The Philips sensor is a closed loop 0-10v sensor for use with Advance Mark 7 ballasts. Occupancy Sensor: - Wattstopper occupancy sensor is a PIR sensor with additional hold-off daylight feature.

LAMPING

1, 2, or 3 lamp cross sections with T8 or T5/T5HO lamps. Lamp diffuser included with T5HO lamps.

BALLAST

Electronic instant-start ballast <10% THD, 0.88 BF standard for T8 lamps. Electronic rapid-start ballasts <10% THD, 1.0 BF standard for T5/T5HO lamps. Optional adders: rapid-start ballasts (standard for T5/T5HO), 347V, emergency battery packs, dimming ballasts (controls by others). Contact factory for multiple ballast factors in one luminaire.

MOUNTING OPTIONS

Standard semi-adjustable aircraft cable (AC) (± 0.5") in lengths of 12", 15", 18", 21", 24", 27", 30", 36". Mounting connects to fixture with factoryinstalled Level and Lock Assembly™ – which allows side-to-side fixture leveling and locks it into place. Optional Adders: fully adjustable aircraft cable (FA) in lengths up to 250".

SUPPORT CABLES

Plated steel cable and hardware.

FEED

18 gauge straight cord. 14 gauge feed cord used when fixture current exceeds 5 amps. Optional Adders: Coil Cord Feed.

FINISHES

Finelite Signal White standard. 185 colors Available from Tiger Drylac's RAL color chart for a nominal Adder.

LENGTHS

4', 8', 12' section lengths can be combined to make longer runs. Contact factory for additional lengths. Optional Rounded Endcap (RE) adds 5.125" to each end.

WEIGHT

Fixture weight = 3 lb/ft.

LABELS

Fixture and electrical components are ETL listed conforming to UL 1598 in the U.S.A., and Canada; ETL listed to certified CAN/CSA C22.2 No. 250.0. Fixtures will bear ETL labels.

WALL MOUNT

Complementary wall mount available.