LENGTHS: Any length, 2' minimum section length. Increments of 1'.
12' maximum section length.
LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. For Tailored Outputs outside of range from Standard (S) to Very High (V), consult factory. Light engines are replaceable.
DOWNLIGHT OPTION: 12' maximum diffuser length. Flush (F) frost
white snap-in diffuser, standard; 73% transmissive, 99% diffusion
STATIC WHITE FEED: 18-gauge/5-conductor single-circuit feed,
standard. 14-gauge feed used when luminaire current exceeds 5 amps.
TUNABLE WHITE FEED: Standard with one 18-gauge/5-conductor
single-circuit feed. 14-gauge feed used when fixture current exceeds 5
amps. DMX and power feed at same location (standard). DMX feeds cannot
be cut or spliced. DMX feeds should be ordered based on fixed lengths.
STATIC WHITE DRIVER: Replaceable 120V, 277V, and 347V
Constant Current Reduction dimming driver standard. Can be wired
dimming or non-dimming. 0-10V dimming controls with a range of
10% - 100%. Dimming to 1% available; Consult factory. Driver is fully
accessible from below the ceiling.
- Power Factor: ≥ 0.9
- Total Harmonic Distortion (THD): <20%
- Expected driver lifetime: 100,000 hours
LUTRON TUNABLE WHITE DRIVER OPTION:LUTDTW 1% T-Series 2-Channel Digital Tunable White (PSQ Series).
Recessed Spackle Flange: Drywal surfaces (walls or ceilings):
1/4" - 20 stud and nut (provided by others). Mounted with three
equidistant suspension points.
Recessed T-Bar: Standard bracket design works with most lay-in
ceiling types. Brackets secure luminaire to the ceiling grid from
above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for
securing to structure. Consult local codes for tie-wire
ENDCAPS: Flat endcaps (FE) at each end of run add 1/16" to each end of luminaire.
EMERGENCY STYLE: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1608 lumens. Half of a 4' (one side) section will be illuminated in EM mode. Solid Endcap (SE) required at end with a battery pack.
INTEGRATED SENSORS: Integrated PIR Occupancy, Daylight, and Onboard Enlightened sensors available.
FINISHES: Finelite Signal White (SW) powder coat standard. Finelite Black (RAL 9005) with semi gloss fine texture (FB)* and satin Aluminum (SA)* are available. Optional Adders: 185 RAL colors.*
LABELS: Luminaire and electrical components are ETL-listed conforming
to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In
accordance with NEC Code 410.130 (G), this luminaire contains an
internal driver disconnect. UL 924 and UL 2108 - PoE options available
on request, contact factory for more details. These fixtures are rated for
Damp Location. IC Rated. Finelite products use electronic components
that are RoHS compliant, and the mechanical components of the luminaire
have been verified to not knowingly contain any restricted substances
listed per RoHS Directive 2015/863. HPX can be used to comply with
2016 Title 24, Part 6 (JA8); high efficacy LED light source
WEIGHT: 2.3 lb/ft.
WARRANTY: 10-year performance-based warranty on all standard
components. Optional accessories such as emergency battery packs
are covered by their individual manufacturer warranties.