LENGTHS: Any length, 2' minimum section length. Increments of 1'. 12' maximum section length. For Indirect/Direct, select a minimum body length of 3' or greater when requiring dual circuiting or when uplight and downlight outputs differ.
LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. For Tailored Outputs outside of range from Standard (S) to Very High (V), consult factory. Light engines are replaceable.
UPLIGHT OPTION: Patented Top Glow Frost White Diffuser, standard. 12' maximum diffuser length. Optical distribution pattern options include
Widespread Optic (WSO); WSO enables increased luminaire spacing with improved ceiling uniformity, and Asymmetric (ASY-L / ASY-R). Asymmetric optic directs light in a specific direction. ASY-L distributes light to the left, ASY-R distributes light to the right of the luminaire. Consult factory for more tailored lumen outputs.
DOWNLIGHT OPTION: 12' maximum diffuser length. Flush (F) frost white snap-in diffuser, standard; 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Consult factory for more tailored lumen outputs.
STATIC WHITE FEED: 18-gauge/5-conductor single-circuit feed, standard. 14-gauge feed used when luminaire current exceeds 5 amps.
TUNABLE WHITE FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when fixture current exceeds 5 amps. DMX and power feed at same location (standard). DMX feeds cannot be cut or spliced. DMX feeds should be ordered based on fixed lengths.
STATIC WHITE DRIVER: Replaceable 120V, 277V, and 347V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; Consult factory. Separate dimming for uplight and downlight available. Driver is fully accessible from below the ceiling
- Power Factor: ≥ 0.9
- Total Harmonic Distortion (THD): <20%
- Expected driver lifetime: 100,000 hours
LUTRON TUNABLE WHITE DRIVER OPTION:LUTDTW 1% T-Series 2-Channel Digital Tunable White (PSQ Series).
50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150".
ENDCAPS: Flat diecast aluminum endcaps add 1/4" to each end of luminaire.
EMERGENCY STYLE: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. 8' minimum luminaire length. Backup batteries deliver 1608 lumens. Half of a 4' (one side) section will be illuminated in EM mode. Solid Endcap (SE) required at end with a battery pack.
INTEGRATED SENSORS: Integrated PIR Occupancy, Daylight, and Onboard Enlightened sensors available. For Indirect/Direct, select a minimum body length of 4' or greater when requiring dual circuiting.
FINISHES: Finelite Signal White (SW) powder coat standard. Finelite Black (RAL 9005) with semi gloss fine texture (FB)* and satin Aluminum (SA)* are available. Optional Adders: 185 RAL colors.*
LABELS: Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.130 (G), this luminaire contains an internal driver disconnect. UL 924 and UL 2108 - PoE options available on request, contact factory for more details. These fixtures are rated for Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2015/863. HPX can be used to comply with 2016 Title 24, Part 6 (JA8); high efficacy LED light source requirements.
WEIGHT: 2.3 lb/ft.
WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.